I used similar stuff on all my threaded fittings.
Bought it in the plumbing department at Lowes..
CW
> I have a pinpoint leak on the supply side of my mag pump it sounds like a
> calcium reactor and fills the tank with micro bubbles . I suspect it is the
[quoted text clipped - 4 lines]
>
> Thanks Kevin.
Kevin & Donna Sanders, M.D. - 22 Aug 2004 19:20 GMT
thanks I went ahead and used it a week or 2 ago and so far so good so I
guess it is safe
Kevin
> I used similar stuff on all my threaded fittings.
> Bought it in the plumbing department at Lowes..
[quoted text clipped - 11 lines]
> >
> > Thanks Kevin.
CheezWiz - 23 Aug 2004 04:50 GMT
Yea,
I think it is very inert stuff. No problems on my end after many months of
service.
Used it all over my RO/DI unit as well...
CW
> thanks I went ahead and used it a week or 2 ago and so far so good so I
> guess it is safe
[quoted text clipped - 16 lines]
> > >
> > > Thanks Kevin.
Wayne Sallee - 30 Aug 2004 02:21 GMT
I like using Dow Corning non curing silicone sealant/lubricant product number
111. I use it for a lot of stuff.
Wayne Sallee
http://members.aol.com/waynesallee/weblink.htm
Billy - 30 Aug 2004 02:26 GMT
|I like using Dow Corning non curing silicone sealant/lubricant product number
| 111. I use it for a lot of stuff.
Second that one, I have to mail-order it though. Worth it.