Reverse Osmosis water purifier question

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

swhastan - 28 Apr 2005 05:12 GMT

Hi, all
I've used a RO unit about three month.
It has three gallon tank. At the beginning, this tank was fully filled with
RO water. However, it's just filled a third of the tank capacity. I changed
a pre-filter(sediment filter), but nothing's changed.
If you know the solution, please let me know.

Thanks,
Sungwon

Reply to this Message

kim gross - 28 Apr 2005 08:09 GMT

> Hi, all
> I've used a RO unit about three month.
[quoted text clipped - 5 lines]
> Thanks,
> Sungwon

It sounds like you have a 3 gallon pressure tank. If that is the case
you could have loss some of the airpressure against the bladder in the
tank. IF that is the case you will need to add some more air to the
tank. To do this there should be an air valve, just like on a tire on
one end of the pressure tank.

Kim

Reply to this Message

Pet Forum / Aquaria / Marine Reef / April 2005

Reverse Osmosis water purifier question