Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
Mammals
FerretsGuinea PigsHamstersRabbitsRats
Aquaria
GeneralMarine ReefFreshwaterPlantsCichlidsGoldfish
Birds
BirdsParrots
Miscellaneous
Animal HealthPet Loss
PetKB.com
Contact UsLink To UsSearch & Site Map

Pet Forum / Aquaria / Marine Reef / July 2003



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
crushed marble26 Jul 2003 16:52 GMT2
Has anyone used crushed marble as a substrate. The size is about .25 mm
average. Home depot has it here in SoCal for $4.49 a 50 pound bag.
Update26 Jul 2003 16:02 GMT1
I have updated my site - http://www.saftkongen.dk/Reef%20Page/MAIN.htm - Its
in danish, but click on pics - they dont speak any langue :-D
Happy reefin
I need a very simple answer to a lighting and filter question.26 Jul 2003 07:12 GMT7
I need a really simple answer to these two questions.
Background
I have had a 72-gallon bow front saltwater system.  I currently I have
the following items
DIY Coil Denitrator Questions26 Jul 2003 00:02 GMT1
I have been looking at different DIY plan for Coil Denitrators and I was
wondering if anyone has had any luck building one of these things. I am
really curious what kind of pump and flow rate did you use. Can anyone make
any recomendations or give me specific directions on how to ...
Remora pro w/mag and skimmer box users.. question25 Jul 2003 16:39 GMT4
I seem to have a problem with the screws that tighten the skimmer box to
the mag...there to short, I even had Jason at Aqua C send me some a
little longer and they still don't tighten against the mag like they
should? Anyone else have this annoying problem? Its become troublesome
? Permeate Pump25 Jul 2003 16:23 GMT2
has anyone checked their before & after line pressure while installing
a permeate pump.  i'm curious how well they work.
thanks
shane
911:  Damaged skimmer need advice25 Jul 2003 06:18 GMT2
I broke the center tube in my ETSS 500 skimmer while cleaning the unit
this evening.  It fell onto the floor and snaped in two.  I can order a
new one from the manufacturer but it probably won't arrive until Tuesday
of next week at the earliest.  To make matters worse I am going ...
"REVENUE AUDITED" stamp on packages...25 Jul 2003 03:22 GMT1
Recently I placed two, consecutive orders for 200 gallon IO salt mix buckets.
One from BigAlsonline.com, the second from PetSmart.com Both buckets had
a regular UPS shipping label stamped in red ink with "REVENUE AUDITED" text
and a bunch of numbers. There was a reference to New ...
volitan lionfish25 Jul 2003 02:26 GMT1
would a volitan lionfish eat my cleaner wrasse or cleaner shrimp in a 180
gallon fowlr setup?
Ron
Barnacle problems?25 Jul 2003 02:09 GMT2
A number of years ago I had a 100 gallon reef tank. I had a pretty typical
setup, wet-dry filter, large home made skimmer, some kind of auxillary
power-filter & secondary skimmer combo thing hanging on the back, about 5 or
6 floresent tubes. This was my first venture into reef ...
iodine exposure24 Jul 2003 17:54 GMT9
Has anyone had trouble with exposure to an excess amount of iodine with
their tank and had thyroid problems because of it? Has it been documented
anywhere? I regularly dose my tank with iodine for my xenias and put my hand
in the tank frequently. I have recently found out that my ...
Question on MH ballast24 Jul 2003 17:11 GMT1
I was wondering from all you reefers out there that run MH lights.
Is there a big difference in the power used by the different types of
ballast?
Bulb life, heat given off by the bulb...
Any body use these?24 Jul 2003 05:57 GMT4
Has anyone here used this type of canister filter on a reef tank - Ocean
Clear Canister Filter.  Any info appreciated.
When Good Damsels Go Bad (Film at 11)24 Jul 2003 04:05 GMT2
ok.. seriously... it's a cute little yellow tail, too small to hurt me or
anything else in the tank, but it ATTACKED ME today! I had my hand in
pulling out bits of algae (with my two buckets of freshwater sitting handily
by of course). I had noticed yesterday while I was doing some ...
RO/DI Unit Installation problem24 Jul 2003 03:38 GMT3
I'm trying to install a 5 stage RO/DI unit that I bought from EBAY....the
instructions cover a basic kitchen install but don't touch on fish room
applications.  There are 3 lines out that I'm a bit confused as to where
they go.
Pages: 1 2 3 4 5 6 7
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.