| Thread | Last Post | Replies |
|
| Ghosts in the tank ?! | 31 Aug 2004 23:52 GMT | 1 |
All, Well I have just come away from the tank bewildered by what I have just seen. I was watching TV and all the sudden lots of white transparent and opague silk like pieces were floating around in the tank, I can only
|
| Sanity check | 31 Aug 2004 20:46 GMT | 6 |
The new reef tank (still maturing) is a family project and the guys have come up with a list of fish that they fancy populating it with: 1 x blenny 2 x clown fish
|
| Nitrite problems | 31 Aug 2004 19:00 GMT | 2 |
A few weeks ago we restarted a marine tank. It is 270 liters and we have 2 clowns and 2 damsels in the tank. We have came accross a nitrite and amonia problem that we can not seem to get rid of. We have put some bio balls in the tank along with some "Easylife" and that seemed to ...
|
| Low Ph help please.. | 31 Aug 2004 18:51 GMT | 2 |
The water Im using has a PH of only 7.6.. too low for my few month old reeftank. It is advised not to keep depending on buffers like ph plus etc and also I have to use a lot as tank is about 250 G. One suggestion was to add some dead coral as decor and also crush some coral
|
| Help me understand Calcium | 31 Aug 2004 17:37 GMT | 4 |
OK, I give up. I have been searching for an understandable explanation of the relationship between Calcium level, alkalinity, pH, CO2 and whatever else matters. I have looked at some of Craig Bingman's stuff. The guy is brilliant. But I have no PhD in chemistry so a lot of it goes ...
|
| Non-toxic dye to observe water flow in reef | 31 Aug 2004 04:12 GMT | 2 |
I have a chiller circuit for my 150 gallon reef which pumps cooled water back into the tank at about 600 gallons an hour. The tank was designed poorly in that with the hood on, I cannot access 2/3rds of the tank. Further without someone else to help me take the hood off I
|
| "starter" inverts? | 31 Aug 2004 00:39 GMT | 4 |
I've just acquired some decent lighting, the last component I needed to go reef, from FOWLR. I'm now running 6x65 PC (4-10,000k & 2-actinic) on a 75 gallon with 20g sump, seaclone100 skimmer, 60 lbs Fiji LR. Lightly stocked; six-line and some firefish, along with a
|
| Anemone - Timings, Feeding and Care ? | 31 Aug 2004 00:23 GMT | 2 |
All, I have been unsuccessful previously keeping anemones and I would like to add one to my new tank. When would you suggest is a good time to add one after the tank has been matured? (tank has been matured for 3 weeks now)
|
| emergency marine aquarium :-) | 30 Aug 2004 16:12 GMT | 4 |
My son came back from the seaside at the weekend with a bucket full of shells (like they do). Unfortunatley among them were about a dozen muscles and two small crabs which were still very much alive! We're going back to the seaside on saturday, so I'd really like to keep
|
| Lion Fish ate a Hermit crab.. | 30 Aug 2004 09:29 GMT | 2 |
I put a prawn in my tank last night and it got the Lion Fish excited, but the dumb thing mistook a small hermit crab for a prawn and ate it hole. What can I do ?, the shell is in it's guts now. Being a poisonous fish I didn't want to grab it and pull the thing out.
|
| thread sealing compound | 30 Aug 2004 02:26 GMT | 5 |
I have a pinpoint leak on the supply side of my mag pump it sounds like a calcium reactor and fills the tank with micro bubbles . I suspect it is the union because when I put water on it it sucks it in. Maybe it has the wrong sized O-ring. Can I use a thread sealing compound ...
|
| A deep sand bed or a shallow one ? | 29 Aug 2004 04:17 GMT | 2 |
All, Another question which still perplexes me is this concept of sand beds and whether they should be shallow or deep. The guy in my LFS swears blind that you should keep it shallow as he says a deep bed just holds rubbish,
|
| Marine Lighting Conundrum ! | 29 Aug 2004 01:32 GMT | 3 |
All, I have been going through the lighting conundrum for marine tanks. I am putting in another new 420 litre tank and I am having problems working out the best lighting scenario.
|
| UK Mail Order Supplier ? | 28 Aug 2004 20:10 GMT | 1 |
All, Does anyone here know a good mail order livestock supplier that is either in the UK or will ship to the UK - some recommendations would be great. Thanks,
|
| Conch Owners and DIY Canopy Makers... | 28 Aug 2004 17:30 GMT | 3 |
If you guys wouldn't mind taking a look at a couple of posts in A.B.A. I would appreciate it... Conch Owners... news:YoyXc.7767$FV3.2198@newssvr17.news.prodigy.com
|