| Thread | Last Post | Replies |
|
| CO2 Contoller compatability | 30 Sep 2004 01:12 GMT | 1 |
I'll be visiting the USA soon (from Europe) and am thinking of picking up a Milwaukee SM 122 PH Controller. I know I will need a new 220v to 12v power adaptor to power the device, but my question is, will the driver or relay within the device power a 230V solenoid (as opposed to
|
| Aquatic Plant Club in Central Florida | 29 Sep 2004 00:38 GMT | 3 |
Is anyone interested in starting an aquatic plant club in the Central Flordia/Orlando area?
|
| CO2 bubble counter | 28 Sep 2004 01:46 GMT | 1 |
Ok. So i made a bubble counter this weekend. i took a small lidded jelly jar, drilled two holes, placed two lengths of rigid air tube into the hole, one protrudes below the water level in the jar, one above. Now i can count my CO2 bubbles. Now what? What am I counting for? i ...
|
| Green Water | 23 Sep 2004 23:31 GMT | 5 |
I'm just wondering what the consensus on what the cause of green water is now a days? I've heard everything from too much Fe, too much Nitrates, too much NH4, etc. I don't have green water currently, but I did get it a lot when I first got into plants a few years ago. I really ...
|
| PMDD ingredients in UK? | 23 Sep 2004 22:36 GMT | 3 |
Hello all. I am looking to get hold of small quantities of PMDD ingredients in UK. The recipe I have calls for; Potassium sulfate
|
| vivarium ground cover | 23 Sep 2004 05:56 GMT | 9 |
Anyone have any suggestions for an attractive vivarium ground cover and/or creeping vine? This is a very well lit, high humidity (90%+), high temperature (80-85 deg. F) setup.
|
| Hornwort dies - why? | 23 Sep 2004 01:22 GMT | 5 |
I setup a new tank, treated the water, dropped ph to about 7.1 or so, and then let it sit for a few days. I put some honrwort in the tank, and within 24 hours most of the needles had fallen off. Temp is about 76-78. I've grown hornwort in a similar tank before, and it grew like ...
|
| Watts vs. Kelvin ??? | 22 Sep 2004 18:11 GMT | 6 |
Which factor is more important when choosing a plant bulb? I have heard its the color that's more important. others say its the wattage.? if its high watts but wrong color it wont help. if its right color but too low of wattage it wont help.....Whets best? I currently have a 20W ...
|
| generic equipment | 22 Sep 2004 13:45 GMT | 5 |
Argh! People say no one really reads the aquaria.tech newsgroup, my post there never got answered and here's the 2nd best place to repost... Some of us know that much equipment packaged and marketed for us aquarists is overpriced, and cheaper generic industrial/home DIY
|
| gH 100 mg/l and kH 80 mg/l for plants??? | 22 Sep 2004 03:32 GMT | 2 |
Just tested my tap water and get: gH 100 mg/l and kH 80 mg/l Using a Hagen test kit. Alk 2.2 PH??? One test kit said 8.0 and another 7.2 - arghh?
|
| Hair/Beard Algae | 22 Sep 2004 01:21 GMT | 16 |
I've been fighting a losing battle with hair/beard on my plants and black brush algae on a piece of driftwood. Tank is 130 litres, my nitrates are always within 5-10 mg/l, tested every 2-3 days, regular (every 7 days) 25% water changes, thorough and deep
|
| Had an interesting idea for a filter | 21 Sep 2004 15:12 GMT | 2 |
I had this idea for a filter for a fish tank, I dont know if it has ever been done before, but here was what i was thinking. Basicly it combines an undergravel filter and a regular powered filter. But my idea was to build a regular powered filter into two sections one
|
| DIY CO2 system-makes my fish sink? | 20 Sep 2004 23:08 GMT | 8 |
HI all- Newbie to this group here I have a 29 gallon freshwater tank and i just spent about 2 1/2 weeks planting the tank. I installed a 1 liter DIY CO2 system yesterday and I noticed last night at about 11pm, that it was bubbling nicely through a
|
| Nitrates and Phosphates out of control | 20 Sep 2004 22:55 GMT | 2 |
I'm having a hard time in my tank with algae, I believe due to the fact that I can't get my nitrate and phosphate levels right. I hope someone has some advice, or can tell me if I'm doing the right thing and just need to be patient.
|
| Tank hood cleaning question | 20 Sep 2004 10:49 GMT | 4 |
I have a 46 gallon with a glass hood. Over the past 8 months I've noticed that the hood has accumulated some mineral deposits, mainly near where my airstones bubble air up the surface. I'm guessing it's because of water splashing onto the glass, evaporating, and then
|